Mounting plates RW motor gearboxes – Screening for greenhouse

Category:

Description

Mounting plate PCD 85 – RSD for greenhouse

 Mounting plate PCD 85 - RSD for greenhouse

Specifications:

Zinc-plated mounting plate for theEP RW45 motor gearboxes in a single or double screen installation with RSD250 rack drives. The mounting plate for the top screen is height-adjustable for lattice heights of 350 to 500 mm and 500 to 650 mm. The mounting plate for the bottom screen is fitted with holes for fitting a strut. Fitting a strut in and/or under the lattice ensures that there are no light or air gaps when the screen is closed. The mounting plate for the top screen is supplied with washer plates.

Mounting plate PCD 105 – Right angled – Wire screen for greenhouse

Mounting plate PCD 105 - Right angled - Wire screen for greenhouse

Specifications:

Zinc-plated mounting plate for fitting theEP RW240/400/600 motor gearboxes into a wire screen system. The mounting plate (1) is fitted to the post with a clamp-plate (2). The clamp-plate is available in two versions, one for the heart roll tube at 92.5 mm from the post and one for the heart roll tube at 100 mm from the post. Other versions available on request.

Mounting bracket RW1000/1400/1200S/1600/2000S – Wire screen for greenhouse

Mounting bracket RW1000/1400/1200S/1600/2000S - Wire screen for greenhouse

Specifications:

Zinc-plated mounting bracket for fitting the RW1000/1400/1200S/1600/2000S motor gearboxes into a wire screen system. Available in various sizes (heart drive shaft to post (B) and post widths (K)). Fit to the post using a mounting set. This set includes locking bolts.

Mounting clamp set RW1200/1600S – Wire screen for greenhouse

 Mounting clamp set RW1200/1600S - Wire screen for greenhouse

Zinc-plate mounting clamp set for fitting theEP RW1000, RW1400, RW1200S and RW1600S motor gearboxes to posts 100 x 50 or 100 x 60 in wire screen systems. Includes 4 washers, 8 nuts and 4 bolts M12 x 110 (post 50), or 4 bolts M12 x 120 (post 60). The mounting clamp set is fitted onto the post, where the motor gearboxes can be secured through the holes in the front side of the gear housing.